7HFKQLFDO,QIRUPDWLRQ
6HUYLFH0DQXDO
●After selecting AUTO mode, air conditioner will operate automatically according to ex-factory setting. Set temperature can’t be
adjusted and displayed. Press “FAN” button to adjust fan speed.
●After selecting COOL mode, air conditioner will operate under cooling mode. Press “+” or “-“ button can adjust set temperature.
Press “FAN” button to adjust fan speed.
●After selecting DRY mode, air conditioner will operate under drying mode at low speed. Fan speed can’t be adjusted.
●After selecting fan mode, air conditioner only blow fan. Press “FAN” button to adjust fan speed.
●Cooling only unit can’t receive heating mode signal. If set HEAT mode by remote controller,press ON/OFF button can’t turn on
the air conditioner.
+/- button
●After each pressing “+” or “-” button, set temperature will increase or decrease 1°C(°F).
When holding “+” or “-” button, 2s later, set temperature will change quickly. Loose the button on remote controller after setting
temperature. (temperature can’t be adjusted under auto mode)
●Under TIMER ON, TIMER OFF or clock setting, press “+” or “-” button to adjust time. (refer to TIMER button for detailed setting)
FAN button
Press this button to select fan speed in sequence: auto( AUTO), first notch ( ), second notch ( ), third notch ( ), fourth
notch ( ) (this function is not available for this air conditioner. Fourth notch is same as third notch).
Note:
●Under AUTO speed ,The unit will automatiacally select suitable fan speed according to ex-factory setting.
●Fan speed can’t be adjusted under DRY mode.
Swing button (not applicable for this model)
Press this button to turn on up&down swing.
SLEEP button
●Under COOL, DRY or HEAT mode, press this button to turn on sleep function. Press this button again to cancel sleep function.
This function is not available for FAN mode and AUTO mode.
TIMER button
Under ON status, press this button to set TIMER OFF. “T-OFF” and “H” flash to display.
Press “+” or “-” button to adjust TIMER OFF setting within 5s. After each pressing of “+” or “-” button, timer setting will increase or
decrease 0.5h. If hold “+” or “-” button, time will change quickly after 2s, and loose the button until reach to your required time.
Press “TIMER” button to confirm it. “T-OFF” and “H” won’t flash any more.
●Under OFF status, press this button to set TIMER ON. Please refer to TIMER OFF procedure for detailed operation.
Cancel TIMER ON/TIMER OFF: Under TIMER setting status, press TIMER button once to display residual time. Press TIMER
button again within 5s to cancel TIMER.
Note:
●Time setting range: 0.5-24h.
●Time interval between two operations can’t exceed 5s. Otherwise, remote controller will exit setting status automatically.
Simple operation
1. After putting through power, press ON/OFF button on remote controller to turn on the air conditioner.
2. Press MODE button to select your required operation mode: AUTO, COOL, DRY, FAN,HEAT.
3. Press “+” or “-” button to set your required temperature. (temperature can’t adjusted under AUTO mode)
4. Press FAN button to select your required fan speed: auto, first notch, second notch, third notch, fourth notch (fourth notch is
same as third notch for this air conditioner.)
3
4
5
6
7
AUTO
COOL
DRY
FAN
HEAT
AUTO
first notch (same as low speed on control panel)
second notch(same as medium speed on control panel)
third notch (same as high speed on control panel)
fourth notch
