24
1)On/Off
The on-off state will change with each button press.
2) Mode Setting
Each time you press this button, a mode is selected in a sequence that goes from AUTO,
COOL, DRY, FAN,and HEAT
After energization, AUTO mode is defaulted. In AUTO mode, the set temperature will not
be displayed on the LCD, and the unit will automatically select the suitable operation
mode in accordance with the room temperature to make indoor room comfortable.
3)”-” Button
Press this button to decrease set temperature. Hold it down for above 2 seconds to
rapidly decrease set temperature. In AUTO mode, set temperature is not adjustable.
4)”+” Button
Press this button to increase set temperature. Hold it down for above 2 seconds to
rapidly increase set temperature. In AUTO mode, set temperature is not adjustable.
5) Fan
This button is used for setting fan speed in the sequence that goes from AUTO, low, medium, high, then back to
auto.
6) Up & Down Swing
Press button to start or stop up & down swing function. The remote controller defaults to simple swing
condition. Press + button and button at the same time at unit OFF to switch between simple swing and
static swing; blinks for 2 seconds. In static swing condition, pressing
button, the swing angle up & down
louver positions. If the unit is turned off during swing operation,the louver will stop at present position.
7) Health Save
Press HEALTH part of this button to turn on or off HEALTH function.(only for some model)
Pressing SAVE this button, SE is displayed and the unit goes into SAVE operation mode. Press SAVE button
again to cancel SAVE function. During SAVE operation , the temperature and fan speed is not adjustable.
8)
Left & Right Swing
Press button to start or stop left & right swing function. The remote controller defaults to a simple swing
position.
Press + button and
button at the same time at unit OFF to switch between simple swing and static swing;
blinks for two seconds
In static swing position, pressing
button the swing angle will change positions.
Remote Control Functions
Product Introduction
