Introduction for buttons on remote controller
13
E-HEATER
button
Left and right
fixed angle
button
This is a general remote controller, when receiving “ ”, the
swing status is the same as “ ”; when receiving “ ”, the
swing status is the same as left and right swing.
Press this button to set left and right swing status, the circula-
tion change is as follow:
Under heating mode, press this button, circulation change of
auxiliary heating status is as follow:
FAN button
Press this button, circulation change of fan speed is as follow:
Press this button, the sleeping status will be circulated in the
following sequence:
SLEEP button
Under dry mode, it can only be operated under the fan speed
of .
Quiet function can only be started under cooling and heating
mode. Turbo can be started under cooling and heating mode.
Under air supply mode, health function (this model has no
health function) shall be started at the same time.
Under cooling mode, start the breeze function, circulation
change of fan speed is as follow:
Remark: when pressing the button of remote controller to
adjust the fan speed to “ ” (speed 1) or “ ”(speed 2), IDU
panel will display “Low” fan speed; when adjusting to “
”
(speed 3) or “ ” (speed 4), the panel will display “Medium”;
when adjusting to “ ” (speed 5), the panel will display
“High”.
After starting heating mode, the remote controller will automati-
cally restore to the auxiliary heating status set previously.
The function is only available for some models.
Auxiliary heating ON (display )
Auxiliary heating OFF(display )
Auto auxiliary heating (no display)
Quiet
Auto
Turbo
Turn off sleep
