11
Function and Control
6
8
7
9
10
11
12
13
14
15
16
17
18
19
I FEEL:
Press this button to turn on I FEEL function. The unit automatically adjust temperature according to the sensed temperature. Press this button
again to cancel I FEEL function.
Press this button to set HEALTH function ON or OFF. After the unit is turned on, it defaults to HEALTH function ON.
Press this button to select AIR function ON or OFF.
CLOCK :
Pressing CLOCK button, blinks. Within 5 seconds, pr or - button adjusts the present time. Holding down either button above 2
seconds increases or decreases the time by 1 minute every 0.5 second and then by 10 minutes every 0.5 second. During blinking after
setting, press CLOCK button again to confirm the setting, and then will be constantly displayed.
TIMER ON :
Press this button to initiate the auto-ON timer. To cancel the auto-timer program, simply press this button again.
After pressing this button, disappear sand " ON " blink s . 00:00 is displayed for ON time setting. Within 5 seconds, press + or - button to
adjust the time value. Every press of either button changes the time setting by 1 minute. Holding down either button rapidly changes the time
setting by 1 minute and then 10 minutes. Within 5 seconds after setting, press TIMER ON button to confirm.
Press this button to set up & down swing angle, which circularly changes as below:
This remote controller is universal. If any command , or is sent out,
， ，
the unit will carry out the command as
indicates the guide louver swings as:
X-FAN:
Pressing X -FAN button in COOL or DRY mode, the icon is displayed and the indoor fan will continue operation for 10 min utes in order to
dry the indoor unit even though you have turned off the unit. After energization, X-FAN OFF is defaulted. X-FAN is not available in AUTO,
FAN or HEAT mode.
TEMP:
Press this button, could select displaying the indoor setting temperature or indoor ambient temperature.When the indoor unit firstly power on
it will display the setting temperature, if the temperature's displaying status is changed from other status to" ",displays the ambient temp-
erature, 5s later or within 5s, it receives other remote control signal that will return to display the setting temperature. if the users haven't set
up the temperature displaying status,that will display the setting temperature.
TIMER OFF :
Press this button to initiate the auto-off timer. To cancel the auto-timer program, simply press the button again.TIMER OFF setting is the
same as TIMER ON.
TURBO:
Press this button to activate / deactivate the Turbo function which enables the unit to reach the preset temperature in the shortest time. In
COOL mode, the unit will blow strong cooling air at super high fan speed. In HEAT mode, the unit will blow strong heating air at super high
fan speed.
SLEEP:
Press this button to go into the SLEEP operation mode. Press it again to cancel this function. This function is available in COOL, HEAT (Only
for models with heating function) or DRY mode to maintain the most comfortable temperature for you.
LIGHT:
Press LIGHT button to turn on the display's light and press this button again to turn off the display's light. If the light is turned on, is dis-
played. If the light is tunrned off , disappears.
Combination of "+" and "-" buttons: About lock
Press "+ " and "-" buttons simultaneously to lock or unlock the keypad. If the remote controller is locked, is displayed. In this case, pressing
any button, blinks three times.
Combination of "MODE" and "-" buttons: About switch between Fahrenheit and Centigrade At unit OFF, press "MODE" and "- " buttons simul-
taneously to switch between
℃
and
℉
AUTO
