background image

Troubleshooting

CAUTION

Phenomenon

Troubleshooting

 

 

 

   

 

Waiting

   The unit does not operate:

The unit does not operate if it is turned on 

immediately after it is turned off. This is to 

 

Odours 

are emitted:

Some odours may be emitted from the indoor

unit. This is the result of room smells (such as

furniture,tobacco,ect.) which have been taken

Consult authorized service center for cleaning

if the odours still exist. 

"Water flowing" noise:

    The swishing noise like water flowing is the 

 refrigerant flowing inside the unit. 

 Mist is emitted in COOL mode

During cooling operation, a thin mist may be

seen emitted from the indoor unit due to high

room temperature and humidity.

After a period of time, 

the mist will disappear with the decrease of 

room temperature and humidity. 

 

 

13

The air conditioner is not user serviceable.Incorrect repair may cause electric shock or 

fire so please contact an authorized service center for professional repair. Following

checks prior to contact may save your time and money.

 Cracking noise:

 

This is the sound of friction caused by expansion

and/or contraction of panel or other parts due
to the change of temperature.

protect the unit. You should wait about 3
minutes.

into the air conditioner. 

Summary of Contents for GWC36LB-D3DNXXE Series





















Reviews: