background image

Note:

Make sure that the Live wire or Zero line as well as the earth wire in the family power 

socket can not be wrong connected, there should be reliable and no short circuit in the 

diagram.

wrong connection may cause fire.

4. The min. distance from the unit and combustive surface is 1.5m. 

1. The power supply should be used the rated voltage and AC exclusive circuit,

the power cable diameter should be satisfied.

2. Don't drag the power cable emphatically.

3.

                       

               

                         

 

1. Air conditioner is type I

 

electric appliance, thus please do conduct reliable earthing

measure.

2. The yellow-green two-color wire in air conditioner is earthing wire and cannot be used

for other propose. It cannot be cut off and be fix it by screw, otherwise it would cause

electric shock.

3. The earth resistance should accord to the National Criterion.

4. The user power must offer the reliable earthing terminal. Please don't connect the

earthing wire with the following place:

Tap water pipe.

Gas pipe.

Contamination pipe.

Other places that professional personnel consider them unreliable.

5. The appliance shall be installed in accordance with national wiring regulations. 

An all-pole disconnection switch having a contact separation of at least 3mm in all poles 

7. Including an air switch with suitable capacity, please note the following table. Air switch

    should be included magnet buckle and heating buckle function, it can protect the circuit-short

    and overload. (Caution: please do not use the fuse only for protect the circuit)

should be connected in fixed wiring. 

It should be reliably earthed, and it should be connected to the special earth device,

the installation work should be operated by the professional. 

The air switch must have the functions of magnetic tripping and heat tripping, in  order 

to protect the short circuit and overloading.

6.

5. The model and rating values for fuses according the silk print on fuse cover or related 

    PCB board.

Notices for installation

Safety Requirements For Electric Appliances

Earthing requirements

18

09K

 

Air switch capacity

Models

16A

12K

16A

For models with a power plug, make sure the plug  

is within reach after installation.   

       

Summary of Contents for GWC09KF-D3DNA7A






























Reviews: