Air Source Heat Pump Water Heater
2
1.2 Safety instructions and recommendations
Before you use this product, please read the following instructions carefully.
Caution
For any exceptions such as
burning smells, please cut off the
power supply and then contact
Gree authorized maintenance
center.
If an exception persists, the air
source water heater may be
damaged, which may even cause
an electric shock hazard or cause
a fire.
Do not operate the water heater
with wet hand.
Otherwise, an electric shock
hazard may be caused.
Before installation, check
whether the voltage of the local
power grid accords with the
voltage on nameplate of the
unit, and capacity of the power
supply, power cord or socket is
suitable for input power of this
unit.
Dedicated lines must be used
for the power supply to prevent a
fire.
Do not use multipurpose sockets
or mobile wiring boards to
connect wires. Otherwise,
overheating or even a fire may be
caused.
Pull out the power plug and
drain the main unit and water tank
when water heater is not in use for
a long time to prevent cracking
caused by cold weather.
Do not damage wires or use
undesignated wires.
Otherwise, overheating or a fire
may be caused.
Before cleaning, please cut off
the power supply.
Otherwise, an electric shock
hazard may be caused.
Use dedicated circuits with a
leakage circuit breaker protection
for the power supply and ensure
sufficient capacity.
Otherwise, overheating, a fire, or
an electric shock hazard may be
caused.
Do not change the power
cord or socket without any
consent. Wiring tasks must be
completed by qualified
electricians. Ensure proper
grounding for the metal part of
the unit, and do not change the
grounding mode.
