-
6
-
Names and Functions Remote Controller
1.Power:
Press once to start and press once more to stop the unit.
2.Mode:
Press this button to change the operation mode in order of:
COOL → DRY → FAN →HEAT
GPC07AJ-A3NNA1A
:
COOL → DRY → FAN
3.
" " " "
:
Press" " once, the temperature will increase 1
(°F). The temperature can be selected from 16
(61°F) ~ 30 (86°F)
4.Fan:
Press this button to change the operation fan in order of:
5. Timer:
button to adjust the timer setting. Timer setting will increase or decrease 0.5 hour by pressing
temperature if there’s no operation for 5s. If timer function is started up, the upper indicator will
keep the display status. Others, it won’t be displayed. Under timer mode, press timer button again
to cancel timer mode.
6. Sleep:
Press sleep button to enter into sleep mode. If the controller operates at cooling mode,
after sleep mode is started up, preset temperature will increase by 2
℃
within 2 hours and then
the unit will operate at this temperature all the time; While, if the controller operates at heating mode,
after sleep mode is started up, preset temperat
ure will decrease by 2
℃
within 2 hours and then the
unit will operates at this temperature all the
time. Sleep function is nor available for fan mode, drying
mode and auto mode. If sleep function is started up, the upper indicator will keep the display status.
Others, it won’t be displayed.
Control panel and the function
In "COOL" or "HEAT" mode, press" " once, the temperature
will decrease 1
°F).
1
2
3
4
5
6
Press timer button to enter into timer setting mode. Under this mode, press " " or " "
" "or" " button within 10 hours, while timer setting will increase or decrease 1 hour by
pressing " "or" " button beyond 10 hours. After timer setting is finished, the unit will display
Operating methods
GPH07AJ-A3NNA1A
:
LOW→MED→TURBO→AUTO
