Multi Variable Air Conditioners Fresh Air Series Indoor Unit
6
3.1 Standard Fittings
Please use the supplied standard fittings listed below as instructed.
No.
Name
Graphics
Quantity
Function
1
Wired Controller
1
Control indoor unit
2
Union Nut Sub-assy
1
Connect exit pipe
NOTE!
The packed attachments should be subject to actual objects. If there are any alterations, there will
be no further notice.
3.2 Location for Installation
(1) The top holder must be strong enough to support unit's weight.
(2) Drain pipe can drain water out easily.
(3) There is no obstacle at inlet or outlet. Please ensure good air circulation.
(4) In order to make sure the space for maintenance, please install the indoor unit according to the
dimension described below.
(5) Keep the unit away from heat source, inflammable gas or smoke.
(6) This is a concealed ceiling type unit.
(7) Indoor unit, outdoor unit, power cord and electric wire should stay at least 1m from the TV set
and radio. Otherwise, these electric appliances may have image interference and noise (Even if
the distance is 1m, when there is strong electric wave, noise may still occur).
Unit: mm
Fig.3.2
NOTES!
①
Installation of the unit must be in accordance with National Electric Codes and local safety
regulations.
