background image

Multi Variable Air Conditioners Ducted Type Indoor Unit 

1 Safety Precautions 

 

WARNING

 

(1) 

This product can’t be installed at corrosive, inflammable or explosive environment or the place with special 

requirements, such as kitchen. Otherwise, it will affect the normal operation or shorten the service life of the 
unit,  or  even  cause  fire  hazard  or  serious  injury.  As  for  above  special  places,  please  adopt  special  air 
conditioner with anti-corrosive or anti-explosion function. 

(2)  Follow this instruction to complete the installation work. Please carefully read this manual before unit startup 

and service. 

(3)  Wire size of power cord should be large enough. The damaged power cord and connection wire should be 

replaced by exclusive cable. 

(4)  After connecting the power cord, please fix the electric box cover properly in order to avoid accident. 

(5)  Never fail to comply with the nitrogen charge requirements. Charge nitrogen when welding pipes. 

(6)  Never short-circuit or cancel the pressure switch to prevent unit damage.   

(7)  Please firstly connect the wired controller before energization, otherwise wired controller cannot be used. 

(8)  Before  using  the unit, please check  if  the piping  and  wiring are correct  to  avoid  water leakage,  refrigerant 

leakage, electric shock, or fire etc. 

(9)  Do not insert fingers or objects into air outlet/inlet grille. 

(10)  Open the door and window and keep good ventilation in the room to avoid oxygen deficit when the gas/oil 

supplied heating equipment is used. 

(11) Never start up or shut off the air conditioner by means of directly plug or unplug the power cord. 

(12) Turn off the unit after it runs at least five minutes; otherwise it will influence oil return of the compressor. 

(13) Do not allow children operate this unit. 

(14) Do not operate this unit with wet hands. 

(15) Turn off the unit or cut off the power supply before cleaning the unit, otherwise electric shock or injury   

may happen. 

(16) Never spray or flush water towards unit, otherwise malfunction or electric shock may happen. 

(17) Do not expose the unit to the moist or corrosive circumstances. 

(18) Under cooling mode, please don't set the room temperature too low and keep the temperature difference 

between indoor and outdoor unit within 5

 (41

). 

(19) User  is  not  allowed  to  repair  the  unit.  Fault  service  may  cause  electric  shock  or  fire  accidents.  Please 

contact Gree appointed service center for help.   

(20) Before installation, please check if the power supply is in accordance with the requirements specified on the 

nameplate. And also take care of the power safety. 

(21) Installation should be conducted by dealer or qualified personnel. Please do not attempt to install the unit by 

yourself. Improper handling may result in water leakage, electric shock or fire disaster etc. 

(22) Be  sure  to  use  the  exclusive  accessory  and  part  to  prevent  the  water  leakage,  electric  shock  and  fire     

accidents. 

(23) Make sure the unit can be earthed properly and soundly after plugging into the socket so as to avoid electric 

shock. Please do not connect the ground wire to gas pipe, water pipe, lightning rod or telephone line.   

(24) Electrify the unit 8 hours before operation. Please switch on for 8 hours before operation. Do not cut off the 

power when 24 hours short-time halting (to protect the compressor).   

Summary of Contents for GMV-ND72PH/A-T(U)

























Reviews: