Preface
For correct installation and operation, please read all instructions carefully. Before reading the
instructions, please be aware of the following items:
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
WARNING
This mark indicates procedures which, if improperly performed, might lead to the death or
serious injury of the user.
CAUTION
This mark indicates procedures which, if improperly performed, might possibly result in
personal harm to the user, or damage to property.
NOTICE is used to address practices not related to personal injury.
WARNING
(1) Instructions for installation and use of this product are provided by the manufacturer.
(2) Installation must be performed in accordance with the requirements of NEC and CEC by authorized personnel
only.
(3) For the safe operation of this unit, please read and follow the instructions carefully.
(4) During operation, total capacity of indoor units should not exceed the total capacity of outdoor units. Otherwise,
poor effect of cooling or heating may result.
(5) Direct operators or maintainers should well keep this manual.
(6) If this unit fails to operate normally, please contact our service center as soon as possible and provide the
following information:
1) Content on the nameplate (model number, cooling capacity, production code, ex-factory date.
2) Malfunction details (before and after the malfunction occurs.
(7) Each unit has been strictly tested and proved to be qualified before ex-factory. In order to prevent units from
being damaged or operating normally because of improper disassembly, please do not disassemble the unit by
yourself. If you need to disassemble and check units, please contact our service center. We will send specialists
to guide the disassembly.
(8) Installation must be performed in accordance with the requirements of NEC and CEC by authorized personnel
only.
(9) Under the standby status, the unit will consume a little power for ensuring reliability of complete unit, maintaining
normal commu
nication and preheating refrigerant. When the unit won’t be used for a long time, cut off the power
of the complete unit. However, please preheat it when operating the unit next time.
