Gree GMV-ND24A/A-T Owner'S Manual Download Page 2

 

 

Preface 

For correct installation and operation, please read all instructions carefully. Before 

reading the instructions, please be aware of the following items: 

(1) For the safe operation of this unit, please read and follow the instructions carefully. 
(2) During operation, total capacity of indoor units should not exceed the total capacity 

of outdoor units. Otherwise, poor effect of cooling or heating may result. 

(3) Direct operators or maintainers should well keep this manual. 
(4) If this unit fails to operate normally, please contact our service center as soon as 

possible and provide the following information: 

● Content on the nameplate(model number, cooling capacity, production code, 

ex-factory date). 

● Malfunction details(before and after the malfunction occurs). 
(5) Each unit has been strictly tested and proved to be qualified before ex-factory. In 

order to prevent units from being damaged or operating normally because of improper 
disassembly, please do not disassemble the unit by yourself. If you need to disassemble 
and check units, please contact our service center. We will send specialists to guide the 
disassembly. 

(6) All graphics in this manual is only for your reference. For sales or production 

reasons, these graphics are subject to change by manufacturer without prior notice. 

 

User Notice 

● 

This appliance is not intended for use by persons (including children) with reduced 

physical, sensory or mental capabilities, or lack of experience and knowledge, unless they 
have  been  given  supervision  or  instruction  concerning  use  of  the  appliance  by  a  person 
responsible for their safety.Children should be supervised to ensure that they do not play 
with the appliance. 

 

Correct Disposal of this product 

 

This marking indicates that this product should not be disposed with 
other household wastes. To prevent possible harm to the environment 
or human health from uncontrolled waste disposal, recycle it 
responsibly to promote the sustainable reuse of material resources. To 
return your used device, please use the return and collection systems 
or contact the retailer where the product was purchased. They can take 
this product for environmental safe recycling.   

Summary of Contents for GMV-ND24A/A-T























Reviews: