Multi Variable Air Conditioners Concealed Floor Standing Unit
4
3.1 Standard Fittings
Please use the supplied standard fittings listed below as instructed.
No.
Name
Appearance
Q'ty
Usage
1
Wired Controller
1 pc.
To control the indoor unit
2
Special Nut
1
pc.or
2 pcs.
GMV-ND22
～
45ZA/A-T:2 pcs.
GMV-ND56
～
71ZA/A-T:1 pc.
3
M10×8 Nut with Washer
4 pcs.
To be used together with the hanger
bolt for installing the unit.
4
M10 Nut (M10×8.4 Nut)
4 pcs.
To be used together with the hanger
bolt for installing the unit.
5
M10 Washer (Spring
Washer M10×2.6)
4 pcs.
To be used together with the hanger
bolt for installing the unit.
6
Insulation
1 pc.
To insulate the gas pipe
7
Insulation
1 pc.
To insulate the liquid pipe
8
Plastic clamp
2 pcs.
To lead the wire
9
Fastener
8 pcs.
To fasten the sponge
10
Supporter(120mm)
2 pcs.
To fix the indoor unit
11
Resultant screw bolt
4 pcs. Assembly parts of Supporter to fix the
indoor unit
12
Corrugated pipe
0 or 1
pc.
GMV-ND22
～
45ZA/A-T
：
0 pc.
GMV-ND56
～
71ZA/A-T
：
1 pc.
13
Filter element
1
sheet
To be used the return air filter
NOTES!
①
User can purchase remote controller and receiver otherwise by himself.
②
The height of ex-factory supporter is 120mm. If user wants to increase or decrease unit
installation height, please purchase the supporter of different height. Other height of supporter
is 80mm, or 160mm.
③
For unit accessories, please refer to the indoor unit packing list, which is subject to change
without prior notice.
3.2 Location for Installation
(1) The appliance shall not be installed in the laundry.
(2) The location should be able to withstand the weight of unit.
(3) The ground for installing unit shall not be slant apparently.
(4) Drain pipe can drain water out easily.
(5) There is no obstacle at inlet or outlet. Please ensure good air circulation.
