Multi Variable Air Conditioners One-way Cassette Type Indoor Unit
5
No.
Name
Appearance
Q'ty
Usage
8
M10 Washer
10
To be used together with the
hanger bolt for installing the unit.
9
Tapping screw
10
To be used connect the panel to
the main body.
10
Insulation
1
To insulate the gas pipe
11
Insulation
1
To insulate the liquid pipe
12
Sponge
4
To insulate the drain pipe
13
Fastener
4
To fasten the sponge
3.2 Installation Position Selection
(1) The appliance shall not be installed in the laundry.
(2) The location should be able to withstand the weight of unit.
(3) The water can be drained conveniently from drainage pipe.
(4) There should be no obstruction near air inlet and air outlet.
(5) Follow the installation distance required in the Fig below to ensure sufficient space for
maintenance.
(6) The installation location should be far from heat sources, flammable or explosive gas, or smog
spread in the air.
(7) The indoor unit, outdoor unit, power cord and connection electricity wire should be at least 1m
from television and radio in order to prevent interference and noise. (Even though 1m distance
is ensure, there may be noise if the electric wave is too strong.)
Unit:mm
Fig.3.2
Models:
H(mm)
GMV-ND22~56TD/A-T
207
NOTES!
①
The unit shall be installed in accordance with national standards or local regulations.
②
Only qualified personnel can carry out installation work, please contact our designated dealer
or local service center before installation.
③
Make sure all the installation work completed before energizing.
