Multi Variable Air Conditioners Two-way Cassette Indoor Unit
14
4.4.2 Panel installation
(1) Adjust the panel direction. Let the swing motor on the panel keep the same
side with connection pipe.
Fig. 4.4.4
(2) Adjust the position of panel to make the panel holes fix at the holes on the unit .
(3) Fix the 4 screws at the two side of panel and then fix the 2 screws in the middle
of panel.
(4) Install the air inlet grille and then lock the clasp.
(5) Tighten the screw until the thickness of sealing material between panel and
indoor unit is about 5
～
8mm(3/16
～
5/16in).
Unit: mm (in.)
Fig. 4.4.5
