Controls
Power Pad
Turns air conditioner on and off.
Display
1. Under ON status without timer setting, the
operation mode is
Auto, Cool, Energy Saver
or
Dry
mode, and the set temperature will be
displayed.
2. Under ON status without timer setting, the
operation mode is fan mode and the ambient
temperature will be displayed.
3. Time will be displayed under timer setting or
timer preview.
Temp Increase /Decrease Pads
Use to set temperature when in
Cool, Energy
Saver
or
Dry
mode. The
Set
light will turn on
while setting.
Timer Increase /Decrease Pads
Each touch of the
Increase / Decrease
pads on the unit will set the delay time
when using the
Timer
pad on the unit
The
Set
light will turn on while setting.
Fan Speed Pads
Use to set the fan speed to
Low, Med, High
or Autoon the unit.
Mode Pad
Use to set the air conditioner to
Cool, Energy
Saver, Fan Only, Dry
or
Auto
mode.
5
Filter check Pad
Timer Pad
Timer
ON
can be set under off state of unit. If timer
ON
reaches, the system will run under previous setting mode.
The setting range is 0.5~24hr.
Timer
OFF
can be set under on state of unit. If timer
OFF
reaches, the unit will turn off. The timer can be set in 0.5
hour increment below 10 hours and in 1 hour increment
for 10 hours or above.
After fan rotates for 250h totally, lamp of cleaning
filter is on to remind customer clean it.
Note:
When user cleaned the filter, press Filter
check button to clear the operation time.
Meanwhile, the warning indicator will turn off
8
7
6
5
1
2
3
4
Lights next to the touch pads on the air conditioner control panel indicate the selected settings.
Air Conditioner Controls
Light indicates the unit
is in the temperature or
delay time Set mode.
Starting Your
Air Conditioner — Digital
Control
8
7
1
3 4
5
6
2
