background image

 

Clean

 the air filter

(a)

(b)

Clean and care

Caution

Turn power off and pull out the power plug before cleaning air conditioner, or it may cause

 electric

shock.

Never sprinkle water on the indoor unit and the outdoor unit for cleaning because it can cause

 an

electric shock.

Volatile liquid (e.g. thinner or gasoline) will damage the air conditioner. (So wipe the units with a

dry soft cloth, or a cloth slightly moistened with water or cleanser.)

Clean the front panel

Clean the air filter (Recommended once every three months)

NOTE: If dust is much more around the air conditioner, the air filters should be cleaned many times.

After taking off the filter, don't touch the fin of indoor unit, in order to avoid hurt your fingers.

Take down the air filter

At the slot of surface panel to open an angle, pull the air filter

downward and take it out, please see the Fig. 4(a, b).

To clean the dust adhering to the filters, you can either

use a vacuum cleaner, or wash them with warm water

the water with the neutral detergent should below 45

NOTE: Never use water above 45    to clean, or it can

cause deformation or discoloration. Never parch it by

fire, or can cause a fire or deformation.

Insert the air filter

Reinsert the filters along the direction of arrowhead, and

then to cover the cover and clasp it.

Fig.4

When cleaning the front panel, please dip the cloth into the water temperature of 45     below, 

then to dry

the cloth and wipe the dirty part.

Note: Please do not to immerse the front panel in water, due to there are microcomputer components

 and

circuit diagrams on the front panel.

12

and dry it in the shade.

Summary of Contents for GIS409AC





























Reviews: