17
Function introduction for combination buttons
Multi timer function
Dry Contact function
Interface of dry contact device is provided, while the dry contact device shall be
prepared and installed by the customer.
●
THREE TIMERS
●
TWO TIMERS
●
TIMER CANCELLATION
Press uninterruptedly “LIGHT” button 6 times in 7 seconds
，
thus we enter the “Multi
Press uninterruptedly “LIGHT” button 4 times in 7 seconds
，
thus we enter the “Multi
Timer” mode as well as two-minute-counting-down stars. If two couples of times
commands are valid and well-received in 2 minutes, the “Multi Timer” will be activated
along with the success sound of four buzzing, and the former “Multi Timer” settings
with be replaced. If not, then “Multi Timer” mode exits along with the failure sound of
six buzzing, and the former “Multi Timer” settings still remain effective.
Press uninterruptedly “LIGHT” button 8 times in 7 seconds
，
all the “Multi Timer”
●
INVADLID OPERATION
●
INTERACTIVE BUZZING
1. When the three-minute-counting-down in THREE TIMERS, or the
settings will be erased.
two-minute-counting-down in TWO TIMERS is due.
1. After successfully entering the “Multi Timer” mode, one buzzing will be heard to
2. After successful setting of TIMER 1, two buzzing will be heard to prompt that now
3. After successful setting of TIMER 2, three buzzing will be heard to prompt that
prompt that now you can use the “TIMER ON” and “TIMER OFF” buttons to do the
you can use the“TIMER ON”and“TIMER OFF” buttons to do the TIMER 2.
now you can use the“TIMER ON”and“TIMER OFF” buttons to do the TIMER 3.
4. After successful setting of TIMER 3 in THREE TIMERS, or after successful setting
5. If there are any invalid operations, or cancellation commands, six buzzing will
of TIMER 2 in TWO TIMERS, four buzzing will be heard to congratulate you that
“Multi Timer” is done.
be heard.
TIMER 1.
2. TIMER commands are not on-off coupled.
3. TIMER spans overlap each other.
4. TIMER span is shorter than 4 minutes.
Timer” mode as well as three-minute-counting-down stars. If three couples of times
commands are valid and well-received in 3 minutes, the “Multi Timer” will be activated
along with the success sound of four buzzing, and the former “Multi Timer” settings
with be replaced. If not, then “Multi Timer” mode exits along with the failure sound
of six buzzing, and the former “Multi Timer” settings still remain effective.
