10
Introduction for buttons on remote controller
FAN button
3
Note:
● For preventing cold air, after starting up heating mode, indoor unit will delay 1~5
minutes to blow air (actual delay time is depend on indoor ambient temperature).
● Set temperature range from remote controller: 16~30
℃
(61-86°F);
Fan speed: auto, low speed, low-medium speed,medium speed, medium-high
speed,high speed.
TURBO button
4
Under
COOL o
r
HEAT
mode
,
press
t
his
button to t
ur
n to
quic
k COOL o
r
quic
k
HEAT
mode. " " icon is displayed on remote controller. Press this button again
to exit turbo function and " " icon will disappear.
If
start
this
function,
the
unit
will
run
at
super-high
fan
speed
to
cool
or
heat
quickly
so that the ambient temp. approachs the preset temp. as soon as possible.
▲
▲
▲
▲/ button
5
● Press "▲" or " " button once increase or decrease set temperature 1
℃
(°F).
Holding "▲" or " " button, 2s later, set temperature on remote controller will
change quickly. On releasing button after setting is finished, temperature indica-
tor on indoor unit will change accordingly. (
T
emperature can’t be adjusted under
auto mode)
● When setting
TIMER ON, TIMER OFF o
r CLOCK, press "▲" or " " button to
adjust time. (Refer to CLOCK,
TIMER ON,
TIMER OFF buttons) When setting
TIMER ON, TIMER OFF o
r
CLOC
K,
press "▲"
o
r " "
button to
adj
u
s
t t
ime.
(Refer
to CLOCK,
TIMER ON,
TIMER OFF buttons)
▲
▲
This button is used for setting Fan Speed in the sequence that goes from AUTO,
to
then back to Auto.
,
,
,
,
Auto
Medium speed
Low-Medium speed
Low speed
High speed
Medium-High speed
6
Press this button can select left & right swing angle. Fan blow angle can be selected
circularly as below:
button
no display
(s
to
ps
a
t
curre
nt
p
o
si
t
io
n
)
