background image

Vertical Exposed Fan Coil Unit

4

This appliance is intended to be used by expert or trained users in shops, in light industry and on farms, 

or for commercial or household use by lay persons.

Installing the unit in the following places may cause malfunction. If it is unavoidable,please consult the 

local dealer:

(1) 

The place with strong heat sources,vapors, flammable or explosive gas,or volatile objects spread in the 

air.

(2) 

The place with high-frequency devices (such as welding machine,medical equipment).

(3) The place near coast area.
(4) 

The place with oil or fumes in the air.

(5) 

The place with sulfureted gas.

(6) 

Other places with special circumstances.

(7) 

Do not use the unit in the immediate surroundings of a laundry, a bath, a shower or a swimming pool.

DISPOSAL: This marking indicates that this product should not be disposed with other 

household wastes throughout the EU. To prevent possible harm to the environment or human 
health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable 

reuse of material resources. To return your used device, please use the return and collection 

systems or contact the retailer where the product was purchased. They can take this product 

for environmental safe recycling. 

This appliance can be used by children aged from 8 years 

and above and persons with reduced physical,  sensory or 

mental capabilities or lack of experience and knowledge if 

they have been given supervision or instruction concerning 

use of the appliance in a safe way and understand the 

hazards involved.Children shall not play with the appliance. 

Cleaning and user maintenance shall not be made by 

children without supervision.

Summary of Contents for FP-102LM/D-K





























Reviews: