Gree FP-102BA2/B-D, Service Manual

Page: 16 / 67

Wall Mounted Type
Fan Coil Unit Service Manual
14
CONTROL
1�3 SLEEP
SLEEP button
Press this button to select Sleep On/Sleep Off. If power is on, Sleep Off is default. If the unit is turned off, the
Sleep function setting will be not retained in memory. If Sleep function is on, the mark of Sleep will display. In
this mode, the time of timer can be adjusted. Under Fan and Auto modes, this function is not available.
1�4 FAN
FAN button
Press this button, Auto, Low, Medium, High-speed can be circularly selected. After powered on, Auto fan
speed is default. Under Dehumidify mode, Low fan speed is default.
Medium Low
High
AUTO
Note: Under the Dry mode, the fan speed isn't adjustable, low fan speed is default.
1�5 CLOCK
CLOCK button
Press Clock button to set the time of clock. When blinks and displays, you can set the time by pr or - button.
If no button is pressed within 10 seconds the remote will revert back to the normal display. Press again to accept the
setting. If it is set the first time, 12:00 is the initial value. Note: If mark
displays on the LCD, it means it is the time of
clock, if not, it is the time of timer.
1�6 LIGHT
LIGHT button
Press this button to select LIGHT On/Off in the displayer. When the LIGHT On is set, the mark will be
displayed and the indicator light in the displayer will be on. When the LIGHT Off is set, the mark will disappear
and the indicator light will be off.
2 OPERATION OF WIRELESS REMOTE CONTROL
Note: This is a general remote control, it could be used for multiple types (functions) of air conditioners. For
some models without the functions specified here, we preserve the right to not to
inform exclusively.
2�1 X-FAN
X-FAN button
①
Press this button to turn on/off the X-FAN function.
②
The function is not available for this function.
2�2 - button
Presetting temperature can be decrease the temperature by 1 degree Celsius
once. press and hold for more than two seconds so that we can change the
temperature continuously. The minimum and maximum setting range of the
temperature is 16 to 30 degree Celsius.
2�3 + button
Press this button increase the temperature by 1 degree Celsius once. Press and
hold for more than two seconds so that we can change the temperature continuously.
The minimum and maximum setting range of the temperature is 16 to 30 degree.
2�4 TEMP�
TEMP�
button
Press this button to select the display of either indoor setting temperature or
indoor ambient temperature. When the indoor unit powered on firstly, setting
temperature display is default. Change status to to display the ambient temperature.
If received control signal in 5 seconds, the display temp.will revert back to setting
temperature. When unit is off, indoor setting temperature display is default. Note:
This function is only available for certain models.