Gree FLEXX36HP230V1AO, Installation & Owner'S Manual

Page: 33 / 40

DC Inverter Series for R410A Unitary Split Air Conditioner
28
No. Error code Error
15 P0 Driver reset protection
16 P5 Over-current protection
17 P6 Master control and driver communication error
18 P7 Driver module sensor error
19 P8 Driver module high temperature protection
20 PA AC current protection
21 Pc Driver current error
22 PL Bus low-voltage protection
23 PH Bus high-voltage protection
24 PU Charge loop error
25 ee Drive memory chip error
26 e1 High pressure sensor error
27 C4 ODU jumper cap error
4.3 Unit Maintenance
①
. Only professionals are allowed to carry on daily maintenance.
②
. Before contacting any wire, make sure power is cut off.
③
. Do not let any inflammable objects near the unit.
④
. Do not use organic solvent to clean the air conditioner.
⑤
. If you need to replace a component, please ask a professional to repair with a
component supplied by the original manufacturer so as to ensure the unit’s
quality.
⑥
. Improper operation may get the unit broken, hit by electric shock or cause fire.
⑦
. Do not make the air conditioner wet or electric shock may be lead, Ensure that
the air conditioner will not be cleaned by water rinsing under any
circumstance.
①
. Before cleaning, please make sure the unit is stopped. Cut the circuit breaker
and remove the power socket, otherwise, electric shock may occur.
②
. Do not wash the air conditioner with water, otherwise fire hazard or electric
shock may occur.
③
. When cleaning the filter, please be careful of your steps. If you need to work
high above the ground, please be extremely careful.