Gree EJ51000061, Service Manual

Page: 24 / 132

22
Rooftop Packaged
Service Manual
1.2.2 LIFTING METHOD
1) When removing the unit, two ropes are needed to hang the unit along the four ways.
2) In order to avoid the extrusion, between the ropes should be add something to protect the unit (e.g.
batten).
3) Please use M12 to tight the support funds.
1.2.3 INSTALLATION PEDESTAL
The unit must be laid on horizontal pedestal that is rigid. It is advised that pedestal is made of concrete.
The high dimension of the pedestal must larger than the dimension that needed for drainpipe installation. And
the unit must be fixed on the pedestal with bolt. The location of pedestal must be able to support the weight
of the unit. If not, the unit may be overturning, declining or falling off in an extreme circumstance(just like
earthquake, typhoon).
Concrete
Pedestal
Bolt
Bolt
Detail G
Detail G
NOTE:
1) The diagram may be different from actual model. The diagram is for pedestal made of concrete.
2) The high dimension K must be enough to install drainpipe (Refer to DRAIN PIPING WORK: K>L1+L2)
Dimension
(mm)
3-5
TON
8-10
TON
13-15
TON
A 312 215 152
B 720 1570 1900
C 1010 1394 1564
D 16 14 14
Dimension
(mm)
20-30
TON
C 2068
D 14
E 430
F 945
G 1065