Gree CROWN+ CROWN09HP230V1B, Owner'S Manual, Page: 15 / 28

14
OPERATION OF WIRELESS REMOTE CONTROLLER
X-FAN MODE
When operating in humid areas, the unit has a DRY COIL function
called X-Fan that will allow the indoor fan to run for a pre-determined
amount of time after the unit is turned off (cooling or dry modes)
to ensure that additional moisture is removed from coil. Push the
“
X-FAN ” button to enable this feature. The X-FAN icon will
be displayed on remote controller. To deactivate this feature, push
the “
X-FAN ” button again.
DISPLAYING SETPOINT ON FRONT PANEL
Only the setpoint temperature will be displayed on the front panel
and on the remote controller.
X-Fan Mode Display
Turbo Mode Display
TIMER SETTING
T-ON button (Timer ON)
To set when you want the unit to turn On at the end of a selected
time period, use the button labeled “T-ON” on the remote
controller. Press this button to make the clock icon disappear,
replaced with the word “ON” (blinking). Press “+” or“-” buttons
to adjust timer setting 1 minute
at a time. Press and hold “+”
or “-” button to set timer more quickly. Press“T-ON” button
again to confirm setting, and the word “ON” will stop blinking.
To cancel, press“T-ON” button again.
TURBO MODE
The desired room setpoint can be achieved faster in TURBO
mode. After selecting the “ HEAT ” or “ COOL ” mode button,
push the “ TURBO ” button. The TURBO icon will be
displayed on the remote controller and the unit will run at an
ultra-high speed. To deactivate the feature, push the“
TURBO ”
button again. The unit will return to normal operation.
Timer ON Display