12
13
OPERATION OF WIRELESS REMOTE CONTROLLER
NOTE:
During this procedure, if no button is pressed within 10 seconds, remote controller
will automatically exit the sleep curve setting and resume original display. If ON/OFF,
MODE, TIMER, SLEEP, COOLING or HEATING button is pressed during the setting or
inquiry procedure, remote controller will also exit the sleep curve setting.
SIESTA MODE - SLEEP 4
In Siesta Mode the Crown System will automatically change the room temperature every
30 minutes based on the room temperature setting. Sleep Mode will continue until cancelled.
NOTE:
Sleep function will be disabled if the air conditioner is restarted after power
failure; Sleep function can not be set in AUTO mode.
I FEEL MODE
Press this button to use the I FEEL function, and the ( ) icon
will be displayed. The unit will sense room temperature at the
remote controller instead of at the indoor unit. It then adjusts
airflow and temperature accordingly for the ultimate in personal
comfort control and energy savings. Press the button again to
exit this function. For best performance, keep remote controller
away from heat or cold temperature sources while using this
function.
4
I Feel Mode Display
Cooling Mode
Heating Mode
LIGHT BUTTON
Press this button to turn off display light on indoor unit. Press again to turn it back on.
WiFi BUTTON
Press and hold this button for three seconds to turn WiFi function on or off.
See“Operation of Smart Control” section for more information.
Summary of Contents for CROWN+ CROWN09HP230V1B
Page 28: ...66129916954 ...