19
OPERATION GUIDE
POWER LIMIT MODE
Allows the system to limit the maximum output power.
Press the
MODE
( ) and
SLEEP
( ) buttons simultaneously on the remote control to select the desired
Power Limit
mode. With each press of the buttons, the setting options cycle through in the following order :
The maximum power limit of the
Power Limit 2
setting is lower than that of the
Power Limit 1
setting.
If the remote control is turned off or the battery are removed while
Power Limit
is active, the function will be
automatically cancelled. Reactivate the function to resume the power limiting operation.
If the current power is lower than the maximum power of the
Power Limit 2
setting, then the power will not
be limited after entering this mode.
For an installation with one outdoor unit and two indoor units, if any one of the indoor unit enters into
Power
Limit
function, the outdoor unit will enter into the set limiting power mode of that indoor unit. If the two indoor
units enter into
Power Limit
function, then the power of outdoor unit will be limited in accordance with the
lower power of the two indoor units.
NOTE :
This function is only available for some models.
OFF
(no display)
Power
Limit 1
Power
Limit 2
Summary of Contents for Crossover GWH09AGC-D3DNA1B/O
Page 2: ......
