16
Once completed, press the
TURBO
button (
) to confirm the setting.
3.
Following confirmation, the time displayed on the remote control screen will automatically
increase by 1 hour (going from "
" to "
", then "
", and so on up to "
") and the
temperature display will blink, as previously.
4.
Repeat the above steps 2 and 3 until the temperature is set for all 8 hours of the sleep curve.
Once the sleep curve setting is completed, the time and temperature display on the remote con-
trol will return to its original display.
The user can view or revise a custom sleep curve. Hold down the
TURBO
button ( ) for
some time until the remote control enters user customization status. To view the setting without
change, simply press the
TURBO
button ( ) to move on to the next setting. If a setting needs
to be adjusted, Use the arrow buttons(
▲
or
▼
) to do so then pressa the
TURBO
button ( ) to
confirm the new setting.
OPERATION GUIDE
WIFI FUNCTION
Allows the user to control the unit remotely from their smartphone or tablet using the GREE+ App.
Press the
WIFI
button (
) on the remote control to activate the function. The word “ WiFi ” will appear on
the display screen of the remote control. Holding down the
WIFI
button (
) for at least 5 seconds will
deactivate the WiFi function.
Holding down the
MODE
( ) and
WIFI
(
) buttons simultaneously for 1 second will restore the WiFi
module to factory settings.
HEATLH AND SCAVENGING MODES
Allows the unit to clean the air by removing dust particles and germs and/or to gradually replace stale air
inside the room with fresh outside air.
Press the
HEALTH / SCAVENGING
button (
) on the remote control to select the desired mode(s).
With each press of the button, the setting options cycle through in the following order :
Scavenging
& Heath modes
Scavenging
mode only
Health
mode only
OFF
(no display)
NOTE :
This function is only available for some models.
NOTES :
▪ While setting a custom sleep curve, if no operation is performed for more than 10 seconds, the process
will be automatically cancelled and the time and temperature display on the remote control will return
to its original display.
▪ While setting a custom sleep curve, pressing the
POWER
( ),
MODE
( ) or
SLEEP
( ) button will
automatically cancel the process.
Summary of Contents for Crossover GWH09AGC-D3DNA1B/O
Page 2: ......
