GREE U-Match 5 SERIES UNIT SERVICE MANUAL
102
Removal of electronic expansion valve
Note: Before removing the electronic expansion valve, make sure there is no refrigerant in the pipeline and power is cut off.
Step
Picture
Work instruction
7. Check and open the upper and
front panels.
●Check whether each component
and connection
wire is well
connected.
●If everything is OK, install the
upper, left and right panels.
Tighten up the screws.
Model: GUD160W/NhA-X
Removal of front panel
Note: Before removing the front panel, make sure power is cut off.
Step
Picture
Work instruction
1. Remove the upper cover plate.
●Unscrew the screws of the
upper cover plate with a
screwdriver.
2. Remove the front grill.
●Unscrew the screws of the front
grill with a screwdriver.
