7
Technical Information
Service Manual
6. Function and Control
6.1 Introduction of Remote Controller
Buttons on remote controller
Introduction for icons on display screen
Introduction for buttons on remote controller
Notice
：
● This is a general use remote controller. It could be used for
the air conditioner with multifunction. For the functions which
the model doesn't have, if press the corresponding button on
the remote controller, the unit will keep the original running
status.
● After putting through the power, the air conditioner will give
out a sound. Power indicator " " is ON. After that, you can
operate the air conditioner by using remote controller.
● Under on status, pressing the button on the remote
controller, the signal icon " " on the display of remote
controller will blink once and the air condition-er will give out
a "di" sound, which means the signal has been sent to the air
conditioner.
button
On/Off
Press this button to turn on the unit. Press this button again to
turn off the unit.
button
Mode
Press this button can your required operation mode in turn.
Correspondingindicator will be on.
AUTO
FAN
HEAT
only
DRY
● Auto: Under this mode, the unit will operate automatically
according to ex-factory setting. In this case, set temperature
cannot be adjusted.
● Cool: Under this mode, air conditioner operates under cooling
mode. Cooling indicator will be on. Press “Fan Speed” button can
adjust the fan speed.
● Fan Only: Under this mode, air conditioner will not cool or
heat, only blow wind. Fan indicator will be on. Press “Fan Speed”
button can adjust the fan speed.
● Dry: Under this mode, the unit runs in low fan speed for
dehumidification and the corresponding indicator is on; under dry
mode, the fan speed cannot be adjusted.
● Heat: Under this mode, air conditioner operates under heating
mode.
Press “Fan Speed” button can adjust the fan speed.(Cooling only
unit won’t receive heating mode signal. If setting heat mode with
remote controller, press ON/OFF button can’t start up the unit).
button
●Pressing “+” or “-” button once will increase or decrease set
temperature by 1°F(°C).
Hold “+” or “-” button for 2s, set temperature on remote controller
will change quickly.
Release the button after your required set temperature is
reached.
●Under timer setting status, after each pressing of “+” or “-”
button, time will increase or decrease 0.5h . Hold “ + ” or “-”
button, 2s later, time displayed on dual-8 nixie tube will change
quickly. Loosen the button until the time is reached to your set
time.
8
℃
heating function
Set temperature
Scavenging function
Set time
X-FAN function
WiFi function
Light
Set temp.
Outdoor ambient
temp.
Indoor ambient
temp.
Sleep mode
Health mode
I feel
TIMER ON / TIMER OFF
Auto mode
Cool mode
Dry mode
Fan mode
Up & down swing
Child lock
Send signal
Turbo mode
Heat mode
Operation mode
Set fan speed
Temp.
display type
COOL
