Service Manual
Installation and Maintenance
38
Procedure
Steps
Evaporator
6.Remove evaporator
7.Remove front isolation sheet for propeller
housing
8.Remove condenser
sides of condenser in turn, unsolde the
connection pipeline and then remove the
condenser.
sheet, take out the connection plate of
propeller housing and then remove the
front isolation sheet for propeller housing.
Remove 2 screws at left side of evapora-
tor, unsolder all connection pipes. (Note:
the refrigerant should be released before
unsoldering), and then remove the evapo-
rator.
Connection plate of
propeller housing
front isolation sheet
for propeller housing
Screws
Condenser
Bolt
Centrifugal blade
9.Remove centrifugal blade
and then remove the centrifugal blade.
