DEHUMIDIFYING MODE :
• Press on
DRY
to set the air conditioner in dehymidifying mode - will show on the remote
control LCD display ; press on
SEND
.
• To cancel this mode, simply press on
DRY
again.
• In DRY (dehumidifying)
mode, the compressor is running but the fan speed cannot be changed.
TIMER AND TIME (CLOCK) :
When pressing on
TIMER
, you may select
TIMER
to put the timer on and set the number of hours, or
you may select
TIME
(CLOCK) to set the current time.
TO SET THE TIMER :
For an automatic start of the air conditioner :
1.
Press on
TIMER
- the
TIMER
icon will flash and the LCD display will show 0.5 if there have been
no previous setting - otherewise, the display will show the time set previously (number of hours).
2.
Press on
Hr -
the number of hours icon will flash and the
TIMER
icon will stop flashing ; keep on
pressing
Hr
to set the number of hours (1-24) before the air conditioner starts. From
0 to 8
,
time will increase by
1/2 hour
; from
8 to 24
, it will increase by
1 hour
.
3.
Press on
SEND ;
a “beep” will confirm transmission and the time (hours) icon will stop flashing.
TO SET THE TIME (CLOCK) :
• Press on
TIMER
until the
TIME
icon flashes - the LCD screen will display the current time.
• To change the time, press on
Hr
- the
hour
icon will flash ; set the hour, then press on
Min
to set
the minutes - the minute icon starts flashing and the hour icon stops flashing ; set the minutes,
then press on
SEND
- the minute icon will stop flashing.
I
MPORTANT
:
always check and set the clock at the right time before initiating the timer or the sleep
mode ; do nof forget to press on
SEND
.
SLEEP MODE
This mode is a fast way to set a 7-hour time delay automatic shut off of your air conditioner.
1.
Set this mode when the air conditioner is running.
2.
Press on
SLEEP
; the
SLEEP
icon will appear on your remote display ; your air conditioner will
automatically stop running in 7 hours.
4.
If you want an earlier shut off, press on
Hr
- the hour icon will flash ; you may increase the time
(1 hour at a time) up to 7 hours.
5.
Press on
SEND
; a “beep” will confirm transmission and the hour icon will stop flashing and the
remote LCD screen will display the time left before the shuf off of the air conditioner.
6.
To cancel the SLEEP mode, simply press on
SLEEP
again - the
SLEEP
icon will go off, then press
on
SEND
.
• For other operational settings, proceed as detailed previously.
REMOTE CONTROL
13
