24
Maintenance
Service Manual
Procedure
Step
power cord
12.Remove water tray
13.Remove the power cord
14.Remove suction pipe and discharge pipe
15.Remove compressor
Push the 4 clasps on the chassis, pull up
the water tray to remove it.
Twist off the screws and then remove the
power cord
Unsolder the suction pipe and discharge
from the soldering place of suction outlet
and discharge outlet on compressor.
(Note: Release all the refrigerant
completely before soldering)
Twist off the 3 foot nuts with washer used
for fixing the compressor with wrench and
then remove the compressor.
clasps
water tray
screws
soldering joint
foot nuts
compressor
discharge pipe
suction pipe
