you will also want to give your Scanlists names that describe the
objects that you have stored in them.
Enabling/Disabling Scanlists
To enable and disable Scanlists for scanning, press the
MENU
key until you reach the Main Menu, which is indicated at the top
of the LCD display. Use the
and
keys to scroll to Scanlists,
then press the
key to proceed to the list of Scanlists. Each
Scanlist is preceded with a checkbox. To enable a Scanlist for
scanning, press the
▶
/II/SEL
key to add a checkmark to the
selected Scanlist. To disable a Scanlist for scanning, press
▶
/II/SEL
again to remove the checkmark.
Renaming Scanlists
Giving your Scanlists descriptive names makes programming
and using the EZ Scan-SD much easier. To name a Scanlist,
navigate to the Scanlists menu as described above, and press
the
key to edit the name. Follow the on-screen instructions to
change the Scanlist name.
Monitoring Imported Objects
Browsing Scanlists and Objects
You can easily browse the objects and Scanlists you have
created in the EZ Scan-SD. Press the
MENU
key until the Main
Menu is displayed. Scroll to the Browse Objects menu item and
press the
key. Use the
keys to scroll through the
Scanlists, and use the
keys to review the objects in each
Scanlist.
Scanning Objects
The EZ Scan-SD allows you to scan the objects that you have
stored in Scanlists. You can monitor a single object, or, you can
scan all of the objects that you have stored in enabled Scanlists.
You can also pause the EZ Scan-SD on a single object while it is
scanning.
EZ Scan-SD User Manual
!
Page 36
