Using Vehicle Battery Power
You can power the scanner using an optional car USB power
adaptor and the supplied USB power/data cable.
To power the scanner using a car USB power adaptor, connect
the USB plug end of the supplied USB power/data cable to the
car USB power adapter, and connect the scanner data plug end
of the supplied USB power/data cable to the scanner
ʼ
s PC/IF -
PWR jack. To prevent corruption of SD Card data, always power
the EZ Scan-SD off using the front panel button before
connecting or disconnecting external power sources.
WARNING:
!
Always use the USB cable included with your EZ Scan-SD
!
when connecting your scanner to a computer or to an external
!
power supply. Using other cables may damage the EZ
!
Scan-SD.
NOTE:
!
If you use a cigarette-lighter USB power cable and your vehicle
ʼ
s
!
engine is running, you might hear electrical noise from the engine
!
while scanning. This is normal. Some external USB power supplies
!
may generate RF noise that can interfere with the EZ Scan-SD
ʼ
s
!
reception.
Browsing the Library, Picking Objects and Importing to Scanlists
Overview
Programming the EZ Scan-SD consists of three basic steps, and
you
ʼ
ll follow these steps each time you want to transfer new
objects from the Library to the EZ Scan-SD
ʼ
s Scanlists. The
three steps are as follows:
Browse the Library
Much like a real library, you
ʼ
ll browse the EZ Scan-SD
ʼ
s Library
to find objects that you want to monitor. the EZ Scan-SD
ʼ
s
Library is organized primarily by US States, then by Counties/
Independent Cities.
Pick objects from the Library
When you find an object or group of objects that you want to
monitor, you “pick” them by selecting them, which marks them for
the Import objects to Scanlists step.
EZ Scan-SD User Manual
!
Page 29
