Greatneck 80159, Owner'S Manual

Page: 13 / 23

13
TRIGGER SWITCH LOCK
The trigger switch lock-on feature allows
the trigger switch to be locked in the ON
position at full speed when continuous
operation for extended periods of time is
required (Fig. 3).
To lock the trigger switch in the ON
position, pull back on the trigger switch to
start the drill and push the trigger switch
lock button (3) into the drill handle.
Release the trigger switch while holding
the trigger switch lock button into the drill
handle. The drill will continue to run. To
release the trigger switch lock button, pull
trigger switch back and then release the
trigger.
DRILL / IMPACT SWITCH
The drill / impact switch (4) changes the
drilling mode between conventional drilling
and impact for drilling concrete (Fig. 4). To
operate the drill in drill mode, push the drill
/ impact switch to the right. To operate the
drill in impact mode, push the drill / impact
switch to the left.
WARNINGS:
a) Always use face shield, hearing
protection and a dust mask when
drilling in concrete.
b) Always use carbide tipped masonry
bits when drilling in masonry. Any other
type of bit could break and possibly
cause serious injury.
!
ASSEMBLY AND OPERATION
Fig. 3
Fig. 4
3
4