12
REMOVING BLADE
To remove the blade, simply loosen the
blade clamp set screw and pull the blade
out of the blade clamp.
ADJUSTING PIVOTING SHOE
The pivoting shoe will pivot to follow the
angle of the blade to the workpiece. This
action ensures the flat surface of the shoe
is against the workpiece for better cutting
action and easier control of the saw.
The shoe can be adjusted in or out,
allowing the use of the blade teeth at
different points of the blade. This will
provide longer blade life as one section of
the blade becomes dull.
1. To adjust the pivoting shoe (1), loosen
the two pivoting shoe hex screws (2)
on the lower side of the saw using the
4 mm hex key (3) supplied (see
Fig. 2).
2. Slide the pivoting shoe in or out until it
is in the appropriate position.
3.
Lock the pivoting shoe in place by
tightening the pivoting shoe hex
screws.
4.
Pull outward on pivoting shoe to
ensure it is firmly locked in place.
ASSEMBLY AND OPERATION
Fig. 2
Summary of Contents for 80155
Page 19: ...19 PARTS DIAGRAM MODEL 80155...
