Extra Regenerations
To start an additional automatic regeneration press the regeneration button and release
DO NOT HOLD THIS BUTTON IN.
The display will show
regen in 15 sec and then begin a regeneration when the countdown
reaches zero.
The display will change to
BRINE FILL for a few minutes then REGEN PENDING for 2 hours.
During this time nothing will appear to happen but the water softener is dissolving salt to a
concentrated brine solution in order to carry out the regeneration. After The 2 hours have elapsed
the water softener will automatically carry out the remainder of the regeneration cycle. Softened
water is available to you during the
REGEN PENDING period.
Further Information
Do not worry if your water softener regenerates during the day. This is the Self Protect
Programme initiating an additional regeneration as the softener does not have sufficient
softened water to last until the next scheduled regeneration time at 2.00am
A regeneration will generally last between 60 -90 minutes. During this time the softener
automatically by-passes to ensure continuous water supply.
The normal default regeneration time is 2.00am when in most households little or no water is
being used. If you want the water softener to regenerate at another time then simply adjust
the clock. Eg for 4.00am regeneration set the clock 2 hours slow.
Salt should not be allowed to run down we recommend keeping the water softener at least
half full.
Going on Holiday
We recommend that you turn off the water to the whole house when leaving the property for any
extended period or holiday. On your return after switching the water back on introduce an extra
regeneration as described above.
Don’t worry if the water is discoloured on your return this is perfectly normal and safe. It will
rinse away after a few litres of water have been used.
Great Water Limited
Unit 9b Camphill Industrial Estate, West Byfleet, Surrey KT14 6EW
01932 245783 www.greatwater.co.uk [email protected]
8
