GREAT PLAINS YP1630F-1630, Operator'S Manual, Page: 127 / 142

YP1630F-1630 and YP1630F-1670 Table of Contents Index Appendix C - Initial Setup
Great Plains | 401-832M | 2018-07-31 Table of Contents Index 123
Set Planter Row Count
The PM400 supports three row configurations
pre-defined by you. You may need only one.
Refer to Figure 126
At first power-up, the PM400 usually has an incorrect row
count for your planter.
10. Press the PLANTER SETUP key.
Note that the Planter Configuration Indicator is
under the “1” in the Configuration block .
This change is for Configuration 1.
11. Press the Right Arrow key to highlight the
Number of Rows field .
12. Press the ENTER key to modify the # of Rows.
Refer to Figure 127
13. Use the Left and Right Arrow keys ( or ) to
select the digits to modify. Use the Up or Down Arrow
keys (
or ) to increment or decrement. Change
the row count to the table value for your planter
model and operating configuration.
14. Press the ENTER key to save the correct row
count.
Set Planter Row Spacing
15. Press the Down Arrow key to select the Row
Spacing field .
16. Use the Left and Right Arrow keys ( or ) to
select the digits to modify. Use the Up or Down Arrow
keys (
or ) to increment or decrement. Change
the row spacing to the value for your planter model
(35 cm or 15 inches).
17. Press the ENTER key to save the corrected row
spacing.
Row Setup
18. Use Right Arrow key to navigate to the “I/O”
field .
19. Use the Left and Right Arrow keys ( or ) to
select a seeding icon for an odd numbered row.
20. Use the Up or Down Arrow keys ( or ) to
change it to a blockage icon .
21. Repeat step 19 and step 20 for 15 more odd
numbered rows.
22. Press the ENTER key to save the revised row
configuration.
Figure 126
Planter Default Setup
31934
a
b
c
a
Figure 127
16-Row with Fertilizer Blockage
34561
a
b
c
d
b
d