GREAT PLAINS Yield-Pro PL5800, Operator'S Manual

Page: 76 / 111

PL5800 Planter Table of Contents Index Options
Great Plains | 411-474M | 12/17/2019 69
Options

Hydraulic Hitch
A hydraulic hitch can be substituted for the standard
2-point hitch.

PTO Pump Kits
For tractors lacking a sufficient number of remotes
with adequate continuous oil flow capability, kits are
available to convert the hydraulic motor to tractor
power take-off (PTO).
A 1000 rpm PTO is required with either:

1 7/8 inch (44.5 mm) 20-spline shaft, or

1 3/8 inch (35 mm) 21-spline shaft.
Order one kit and one coupler.
Operation and installation of the PTO kits is
described in the manual included with each kit.

Swath Command
Swath Command provides automatic section control.
The three standard manually operated section
clutches are replaced by individual row clutches.
These row clutches are connected in pars to the
seed monitor CANBUS providing 12 sections under
computer control.
Sections are automatically disabled when overrunning
a previously planted area, or when entering a non-
planting area as defined by a pre-loaded instruction.
Swath Command is available factory or field installed.
The kit does not include, but will require:

a geolocation data source, such as a Trimble
AgGPS262 receiver (available from Great Plains),
and

coordinate augmentation data source, such as
Trimble AgGPS900 RTK rover radio (available from
Great Plains).
Option Packages Part Number
Hydraulic Hitch Assembly 411-529K
Kits and Coupler Part Number
Ground Drive PTO Kit 401-937A
Hydraulic Drive PTO Kit 401-934A
1
3
/
4
-20 PTO Coupler 826-777C
1
3
/
8
-21 PTO Coupler 826-778C
68143A
68171
Description Option Field Kit
YP16-2-1236 57 402-706A
YP16-2-1630
YP16-2-1670
57 402-688A
YP16-2-2420 57 402-705A
YP16-2-3115 57 402-703A
YP16-2-3135 57 402-704A
YP16-2-32TR70
YP16-2-32TR30
57 402-689A
YP16-2-24TR36 57 402-707A
34006