Great Plains
| 401-647M | 2019-06-11
Table of Contents
Index
166
3PYPA
Table of Contents
Index
Appendix B - Initial and Option Setup
Advanced Setup
Advanced Setup grants access to more factory settings.
Many of these should only be changed by a certified
Great Plains dealer. However, if you need to alter your
settings for either tractor, CANBus, or ISOBus steering,
you can make that change in your terminal’s advanced
setup page.
To access the advanced setup screen, go to the initial
steering calibration screen and tap on ‘Advanced Setup’
. A number pad will prompt you for the level 2
access code. Tap in ‘
344787
’ and you should see the
‘Advanced Setup’ screen appear. Now you can tap on a
box next to the steering you want to select it for use. Tap
on the home icon
to exit when finished.
NOTE: Unavailable Steering
If a steering system is unavailable, its name will have
a line struck through it on your screen. Check your
onboard CPU if your system appears unavilable.
Diagnostics
Tap on the diagnostics icon to analyze machine sensor
feedback and check for any problems your planter may
be experiencing.
An unfilled circle indicates the machine’s function is
normal. If a circle is filled red
, then the sensors have
either detected an open (disconnected) circuit or a short
circuit has occurred. Check the appropriate area of the
machine to assess the problem.
If a circle is filled gray
, then the sensors detected an
error has occurred but was cleared.
Figure 165
Steering Advanced Setup Screen
68247C
Figure 166
Steering Diagnostics Screen
68247E
