GREAT PLAINS Turbo Max 1200TM, Operator'S Manual, Page: 16 / 40

07/09/2018 Table of Contents Index 586-535M
1200-1500TM Table of Contents Index Preparation and Setup 12
Hitching Turbo Max to Tractor
Hitch to a tractor for highway transport or field
operations. Hitch to a leading implement only for field
operations. Do not transport behind another implement.
Before hitching, check the compatibility and capability of
the towing tractor or implement:
•
The 1200-1500TM Turbo Max is a pull-type
implement equipped with a standard Category IV
single tang hitch. It may be converted to a
Category III or clevis hitch using supplied accessory
parts, see “ Clevis Hitch ” on page 15.
To prevent soil compaction on rows, set tractor wheels
between rows. For hillsides and steep slopes, set tractor
wheels as wide as possible for maximum stability.
1. Raise tractor three-point arms (if equipped) clear up
to clear Turbo Max.
2. For TWO-WHEEL DRIVE and MFWD tractors, pin
drawbar in fixed center position for field and
transport. For FOUR-WHEEL DRIVE and TRAC-
DRIVE tractors, leave one hole clearance on each
side of drawbar for field position, hitch damage may
occur if pinned solid. Pin in center position for
transport to maintain maximum steering control.
Refer to Figure 3
3. Use jack to raise and lower turbo max tongue.
4. Back tractor draw bar into alignment with hitch .
5. Secure with a locking hitch pin.
6. Secure safety chain to an anchor on the tractor.
Negative Tongue Weight Hazard:
Make certain that turbo max is securely hitched to the tractor
or leading implement before unfolding. An unhitched turbo
max can tip over backwards during folding and unfolding if
the tongue is not secured.
1
2
3
Figure 3
Jack & Hitch Clevis
42244
Crushing Hazard:
Do not stand or place any body part between turbo max and
moving tractor. You may be severely injured or killed by being
crushed between the tractor and turbo max. Stop tractor
engine and set parking brake before attaching cables and
hoses.
1
2
3