PL5500 PTO Pump Kit
Table of Contents
Great Plains
| 411-774M | 2019
-
09
-
12
ii
©
Copyright 2019. All rights Reserved
Great Plains Manufacturing, Inc. provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been
taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed
for damages resulting from the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products
as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future.
Trademarks of Great Plains Manufacturing, Inc. include: AccuShot, Max-Chisel, Row-Pro,
Singulator Plus, Short Disk, Swath Command, Terra-Tine, Ultra-Chisel, and X-Press.
Registered Trademarks of Great Plains Manufacturing, Inc. include: Air-Pro, Clear-Shot, Discovator, Great Plains, Land Pride, MeterCone,
Nutri-Pro, Seed-Lok, Solid Stand, Terra-Guard, Turbo-Chisel, Turbo-Chopper, Turbo-Max, Turbo-Till, Ultra-Till, Whirlfilter, and Yield-Pro.
Brand and Product Names that appear and are owned by others are trademarks of their respective owners.
Printed in the United States of America
Table of Contents
Important Safety Information ..................................1
Safety Decals ....................................................................4
Introduction .............................................................5
Description of Unit .............................................................5
Intended Use .....................................................................5
Related Documents....................................................5
Kit Covered.................................................................5
Owner Assistance..............................................................6
Further Assistance.............................................................6
Tractor Requirements........................................................7
PTO Troubleshooting.............................................. 8
Hydraulic Maintenance ..........................................9
Check Oil Level ..........................................................9
Inspect Hoses and Fittings .........................................9
Oil and Filter Change.........................................................9
Oil Fill .........................................................................9
Oil and Filter Change ...............................................10
Flow Control Valve Adjustment .......................................10
Setting Meter Pressurization ....................................10
Lubrication and Scheduled Maintenance...............12
Installation ......................................13
Before You Start ..............................................................13
Tools Required ................................................................13
Kit Contents (403-919A) ..................................................14
Prepare Planter ...............................................................16
Mount PTO Pump............................................................16
Secure PTO Pump ..........................................................17
Disconnect Existing Fan Hoses................................17
Install Oil Reservoir .........................................................18
Install Oil Cooler ..............................................................18
Install Hydraulic Hoses ....................................................19
Hydraulic Hose Connection Routes.................................20
.........................................................................................20
Connect Oil Cooler Electrical Harness ............................21
Disconnect Oil Cooler Electrical Harness.................21
Charge and Test..............................................................21
Close-out .........................................................................21
Torque Values .................................................................22
Hydraulic Fitting Torque ...........................................23
Abbreviations...................................................................24
