GREAT PLAINS PL5500 PTO, Installation And Maintenance Manual

Page: 7 / 28

PL5500 PTO Pump Kit Table of Contents
Great Plains | 411-774M | 2019 - 09 - 12 Table of Contents 5
Introduction
Description of Unit
Power Take - Off (PTO) pump assembly kit converts the hydraulic fan power source from tractor hydraulic remote to
tractor Power Take - Off (PTO).
Each PL5500 PTO Pump Kit includes:
•
a flow control valve assembly for setting fan rpm,
•
a tethered 540 rpm PTO pump with torque arm and safety chain (no gearbox is required),
•
an oil reservoir with sight gauge, line filter, and 6.5 gallon capacity (5.5 gallons/21 liters, used),
•
an oil cooler with an electrical harness and;
•
all interconnecting hoses (not shown).
This kit has specifically been designed for use in the PL5500 planter.
Intended Use
A PTO pump assembly kit may be needed where:
•
the tractor has an Open Center hydraulic system;
•
the tractor has no remote port for the fan; or,
•
the tractor is Closed Center, but the remotes offer insufficient oil flow to reliably operate the fan.
Related Documents
Kit
Cover
ed
Using This Manual
This manual familiarizes you with safety, adjustments, maintenance, and assembly. Follow all recommendations and
instructions to ensure safe and efficient operation. Refer to Operator Manual for operation instructions. It may be
necessary to refer to your tractor’s operator manual for information about hitching, connections, and PTO information,
warnings, operation, and intended usage.
Definitions
The following terms are used throughout this manual.

NOTE:
Paragraphs in this format provide useful information related to the current topic.
Description Part Number
PTO pump assembly kit for PL5500
Maintenance and Installation Manual
(this manual)
411-774M
PL5500 Operator Manual 411-633M
PL5500 Parts Manual 411-633P
Material Rate Manual for Individual
Rate Control (IRC)
411-652B
Material Rate Manual for Contact
Drive Material Rate
411-633B
Description Part Number
PL5500 PTO Kit for Open Center 403-919A