GREAT PLAINS NTS2507 Operator'S Manual Download Page 3 | Manualshive

Page: 3 / 76

background image

Table of Contents

7/1/19

NTS2507, NTS2509, & NTS2511 s/n+ 2019+ NTS Seeder 313-900M

©

Copyright 2019 All rights Reserved

Great Plains Manufacturing, Inc. provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been
taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for
damages resulting from the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as
it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future.

Trademarks of Great Plains Manufacturing, Inc. include: AccuShot, Max-Chisel, Row-Pro,

Singulator Plus, Short Disk, Swath Command, Terra-Tine, Ultra-Chisel, and X-Press.

Registered Trademarks of Great Plains Manufacturing, Inc. include: Air-Pro, Clear-Shot, Discovator, Great Plains, Land Pride, MeterCone,

Nutri-Pro, Seed-Lok, Solid Stand, Terra-Guard, Turbo-Chisel, Turbo-Chopper, Turbo-Max, Turbo-Till, Ultra-Till, Whirlfilter, and Yield-Pro.

Brand and Product Names that appear and are owned by others are trademarks of their respective owners.

Printed in the United States of America

Table of Contents

Important Safety Information . . . . . . . . . . . . . . 1

Safety at All Times . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Look for the Safety Alert Symbol . . . . . . . . . . . . . . . 1
Safety Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Patented Lockout Clutch . . . . . . . . . . . . . . . . . . . . 10
Using This Manual . . . . . . . . . . . . . . . . . . . . . . . . . 10
Owner Assistance . . . . . . . . . . . . . . . . . . . . . . . . . 10

Section 1: Assembly & Set-up . . . . . . . . . . . . 11

Tractor Requirements  . . . . . . . . . . . . . . . . . . . . . . 11
Quick Hitch Compatibility . . . . . . . . . . . . . . . . . . . . 11
Torque Requirements  . . . . . . . . . . . . . . . . . . . . . . 11
Dealer Preparations . . . . . . . . . . . . . . . . . . . . . . . . 11
Sling Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Flex Guard Hose  . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Small Seeds Zero Adjustment Set-up  . . . . . . . . . . 13
Tow Hitch Option . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Acremeter Option . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Hydraulic Plumbing For Tow Option. . . . . . . . . . . . 16
Purge Hydraulic System. . . . . . . . . . . . . . . . . . . . . 17

Section 2: Operating Instructions . . . . . . . . . 19

Operating Checklist . . . . . . . . . . . . . . . . . . . . . . . . 19
Tractor Shutdown Procedure . . . . . . . . . . . . . . . . . 19
Hook-up 3-Point Seeder. . . . . . . . . . . . . . . . . . . . . 20
Check LED Lights  . . . . . . . . . . . . . . . . . . . . . . . . . 21
Check Tractor Clearance . . . . . . . . . . . . . . . . . . . . 21
Unhook 3-Point Seeder  . . . . . . . . . . . . . . . . . . . . . 21
Hook-up Pull-Type Seeder . . . . . . . . . . . . . . . . . . . 22
Store Park Jack on Seeder Frame . . . . . . . . . . . . . 23
Unhook Pull-Type Seeder  . . . . . . . . . . . . . . . . . . . 23
Install Transport Locks & Spacers . . . . . . . . . . . . . 24
Transporting with Seeder Attached  . . . . . . . . . . . . 24
Level Seeder With 3-Point Mount. . . . . . . . . . . . . . 25
Level Seeder With Pull Hitch . . . . . . . . . . . . . . . . . 26
Filling Small Seeds Seedbox . . . . . . . . . . . . . . . . . 27
Filling Grass Seedbox  . . . . . . . . . . . . . . . . . . . . . . 27
Filling Native Seedbox . . . . . . . . . . . . . . . . . . . . . . 28
How the Seeder Works  . . . . . . . . . . . . . . . . . . . . . 28
Lockout Clutch . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Drive Sprocket Engagement  . . . . . . . . . . . . . . . . . 30
Operating the Seeder. . . . . . . . . . . . . . . . . . . . . . . 31
General Operating Instructions  . . . . . . . . . . . . . . . 32

Section 3: Roller Adjustments . . . . . . . . . . . . 33

Front Spike Roller Angle . . . . . . . . . . . . . . . . . . . . 33
Mud Scrapers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Section 4: Grass Seed Rate Adjustment . . . . 34

Grass Seed High/Low Range Set-up . . . . . . . . . . . 34
Low Range Reduction Set-up. . . . . . . . . . . . . . . . . 35
Return to Standard High/Low Range . . . . . . . . . . . 35
Grass Seed Cup Gate Setting . . . . . . . . . . . . . . . . 36
Grass Seed Rate Adjustment . . . . . . . . . . . . . . . . . 36
Grass Seed Rate Chart (English) . . . . . . . . . . . . . . 38
Grass Seed Rate Chart (Metric) . . . . . . . . . . . . . . . 41

Section 5: Small Seed Rate Adjustment . . . . 44

Small Seed High/Low Range Set-up . . . . . . . . . . . 44
Small Seeds Seed Rate Adjustment. . . . . . . . . . . . 44
Small Seed Rate Chart (English) . . . . . . . . . . . . . . 45
Small Seed Rate Chart (Metric) . . . . . . . . . . . . . . . 48

Section 6: Native Seed Rate Adjustment . . . . 52

Native Seed High/Low Range Set-up . . . . . . . . . . . 52
Native Seed Rate Adjustment . . . . . . . . . . . . . . . . 52
Native Seed Rate Chart . . . . . . . . . . . . . . . . . . . . . 53

Section 7: Options & Accessories . . . . . . . . . 54

Agitation Extension Kit (Accessory) . . . . . . . . . . . . 54
Electronic Acremeter (Option) . . . . . . . . . . . . . . . . 54
Slow Moving Vehicle Sign (Accessory) . . . . . . . . . 54

Section 8: Maintenance & Lubrication . . . . . . 55

Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Roller Chains & Sprockets . . . . . . . . . . . . . . . . . . . 55

General Chain & Sprocket Maintenance . . . . . . . 55
All Seeds Drive Chains #3, #6, & #9 . . . . . . . . . . 55
Grass Seeds Standard Chains #12 . . . . . . . . . . . 55
Small Seeds Drive Chain #15 . . . . . . . . . . . . . . . 55
Native Grass Seeds Seedbox . . . . . . . . . . . . . . . 56

Native Grass Seed Main Drive Chain #1 . . . . . 56
Native Grass Seed Gearbox Drive Chain #5 . . 56
Native Grass Seed Cup Drive Chain #10 . . . . . 56
Native Grass Seed Agitator Drive Chain #14 . . 56

Grass Seed Standard Drive Chains . . . . . . . . . . 56
Grass Seed Reduction Drive Chains . . . . . . . . . . 56

Roller Chain Part Numbers. . . . . . . . . . . . . . . . . . . 57
Small Seed Roller Chains & Grass Seed Standard
Roller Chains . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Front Spike Rollers. . . . . . . . . . . . . . . . . . . . . . . . . 58
Rear Packer Roller . . . . . . . . . . . . . . . . . . . . . . . . . 58
Long-Term Storage . . . . . . . . . . . . . . . . . . . . . . . . 60
Ordering Replacement Parts . . . . . . . . . . . . . . . . . 61

Continue Table of Contents on next page

«
1
2
3
4
5
...
»

Summary of Contents for NTS2507













































































Reviews:

No comments

Related manuals for NTS2507

Brand: Gaspardo Pages: 146

Brillion Turfmaker III Series

Brand: Landoll Pages: 104

Brand: Equalizer Pages: 35

Brand: AerWay Pages: 18

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands