
Great Plains
| 117-055M | 5/6/19
4
LS10 and LS12
Safety Information
Safety Decals
Your seeder comes equipped with all safety decals in
place.
Read and follow decal directions. Keep all safety decals
clean and legible. Replace all damaged, faded, or
missing decals.
Order new decals from your Great Plains dealer. Refer to
this section for proper decal placement.
When ordering new parts or components, also request
corresponding safety decals.
To install new decals:
•
Clean area on which decal is to be placed.
•
Peel backing from decal. Press firmly on surface,
being careful not to cause air bubbles under decal.
Slow Moving Vehicle Reflector
818-003C
On the back of seeder box, in center;
1 total
Red Reflectors
838-266C
Reflectors at rear on both ends of walkboard;
2 reflectors total
Amber Reflectors
838-265C
Reflectors on both left and right sides of seeder;
four reflectors total
18175
18174A
18174A