manualshive.com logo in svg

GREAT PLAINS d LS12, Operator'S Manual, Page: 24 / 32

Share
Download
GREAT PLAINS d LS12 Operator'S Manual Download Page 24

Great Plains

 | 117-055M | 5/6/19

Table of Contents

Index

20

LS10 and LS12

Table of Contents

Index

Pre-Delivery Instructions

Harness Installation

1.

At the front-center of the frame, install the harness
holder (1) with a 3/8 inch u-bolt (2), lock washers (3),
and nuts (4).

2.

If not already assembled, install the light harness
enhance module (5) to the harness holder with two
1/4 inch bolts (6) and hex flange nuts (7).

3.

Connect the light wishbone harness and harness
lead to the enhance module.

4.

Connect the 3-pin connectors on the wishbone
harness to the red lights. Route the harness through
the hose clips.

5.

Connect the 2-pin connectors on the wishbone
harness to the amber lights.

Harness Damage Hazard:

Make sure all wiring harnesses are secured to the machine to
prevent damage to the harnesses which can result in injury to
the operator or damage to the machine.

Wire Damage Risk:

Make sure all harnesses are secured to machine. To prevent
damage to harnesses, do not stretch wires and do not let wires
drag on the ground.

Figure 16

Harness Holder Installation

71319

2

6

3

4

5

7

1

Summary of Contents for d LS12

































Reviews:

No comments