background image

202-578B

Table of Contents

02/22/2019

18

Table of Contents

Great Plains Manufacturing, Inc.

2SNG24 & 2SNG30

5. Fill three or more compartments at least 

1

2

 full of 

seed in the native grass box. Pull seed hoses off 

openers under the compartments.

6. Turn gauge wheel or crank several times to fill seed 

cups with seed. Turn wheel or crank until seed falls 

to the ground from each cup.

7. Place empty container under the seed tubes to 

gather the seed as it is metered.

8. Note the Drive Type (see Figure 15), and native 

Grass sprocket pair (see Figure 16 on page 19). This 

information is needed for step 9 and for the calcula-

tions later.

9. Rotate crank or gauge wheel for one acre, either as 

tallied on the Acremeter, or as counted, based on the 

table at right.

10. Check that the three seed cups have plenty of seed 

coming into them.

This calibration procedure is shown in example on 

page 20.
11. Weigh metered seed, and subtract the initial weight 

of the container. Divide this number by 3 (number of 

cups metered).

12. Multiply by the number of openers on the drill. This 

equals the pounds per acre at this drive setting. 

Refer to the formulas on page 20.

Note: Refer to the drive setting charts on page 21, the 

numbers listed are the number of revolutions of 

the native grass meter shaft at a particular drive 

type and sprocket range. 

13. To adjust this number, take the pounds per acre 

divided by the shaft revolutions. This is the pounds 

per shaft revolution.

Note: These settings are based on 9.5L-15 tires inflated 

to factory specifications.

Revolutions for One Acre

2SNG24

2SNG30

Crank: Drive Type 1

151

122.5

Crank: Drive Type 1A

310.5

251

Crank: Drive Type 2

44.5

40

Crank: Drive Type 2A

101.5

82

Gauge Wheel

225

182

MeasuredSeed EmptyContainer

3

-----------------------------------------------------------------------------------

PoundsPerSeedCup

=

PoundsPerSeedCup NumberOfOpeners

PoundsPerAcre

=

Total Row Units

Model

Spacing

Rows

2SNG24-2810

10 inch

28

2SNG24-3875

7.5 inch

38

2SNG30-3610

10 inch

36

2SNG30-4875

7.5 inch

48

Summary of Contents for 2SNG24































Reviews: