4. For each mounting bracket, insert
a M5 screw. Tighten all four
screws securely.
Rear
Castors
Front Locking
Castors
Front
Cabinet
Frame
Rear Cabinet
Frame
Assembly Step 4—Install the Grill Head
USE HARDWARE ‘STEP 4’
M5 x 10mm
(10)
14
Burner Box
Mounting
Brackets
Grill Head
Assembly
LOCATE THESE PARTS
Rear
Castors
Front Locking
Castors
1. Position the cabinet frame upside down onto a firm surface
and insert the castors. The front locking castors can be
identified by the square stem. Insert them into the front
cabinet frame and fix using a M5 screw as shown. Push
the rear castors into the plastic inserts located at the
bottom of the rear cabinet frame. Check that all castors are
securely in position.
3. Set the grill assembly onto the top of
the cabinet assembly as shown. Be
sure the grill head lines up inside the
mounting brackets on the top of the
cabinet.
2. Locate the mounting brackets and fix
to the top of each post on the cabinet
assembly as shown using M5 screws.
Note the orientation of the brackets to
each post, slot up.
