1.
2.
3.
4.
5.
6.
7.
Locate the Sideburner Valve at the end of the gas hose.
Insert the valve stem up through the bottom of the sideburner table as shown.
Insert the two M4x8mm bolts to secure the valve.
Make sure the orifice of the valve is inserted into the end of the burner tube as shown. It
may be necessary to loosen the brass burner to get the orifice into the tube.
Locate the loose igniter wire under
the control panel and attach it to
the igniter electrode.
Push the three main burner
control knobs onto the control
valves on the control panel.
Push the sideburner control
knob onto the sideburner
control valve.
Set the sideburner grate onto
the sideburner table.
LOCATE THESE PARTS:
M4x8mm
Bolt (2)
A
USE HARDWARE
”E”
Assembly Step 6
- Attach the Sideburner Valve
Sideburner
Knob
Sideburner Grid
Control
Knobs (3)
Valve Orifice
Sideburner Valve
Burner Tube
Igniter
Wire
Phillips head screwdriver
Tools Needed:
A
15
