background image

1

Paddington Midsleeper

10/05/2021

V5

easy - medium - 

hard

Assembly Difficulty

two-person job

www.gltc.co.uk

www.gltc.co.uk

A few important pointers before you start:
• 

Please read the instructions right through before you start, and 
check that all the components have been included in the pack; 
we find separating all the hardware into piles makes it easier to 
be sure that everything is present and correct.

• 

Make sure you have the right tools. Allen keys are provided 
if required, but screw drivers and other tools are not. You’ll 
find details of the tools you need at the beginning of the 
instructions.

• 

It’s a good idea to build the unit in the room where you are 
going to be using it, to avoid the need to move it after it’s been 
assembled. 

• 

Do not throw away any packing materials until assembly is 
complete, just in case you accidentally discard smaller parts or 
hardware. 
 

Thank you for shopping with GLTC, we hope you enjoy 

having this product in your home.  
We know assembling furniture, toys or accessories is not everyone’s 
favourite way to spend their time, so we’ve tried to make assembling 
this item as quick and painless as possible. 

Summary of Contents for Paddington Midsleeper











Reviews: